The HP5 CYCL-FLEX Series is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX plug in housing. The HP5 is available in 16 standard time ranges from 5 seconds to 60 hours. Time ranges are knob adjustable and all have a progress pointer. Calibrated dials are highly visible and are 7.85 inches in circumference providing easily read and well spaced calibrations on all ranges. The progress pointer is red and displays the remaining time interval.
A pilot light is provided and indicates when the timer motor is energized. Standard timers are supplied with "power on" clutch operation. As an option, a reverse action clutch is available and will not reset on power failure.
The 15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion.
| Reset Time: 1/2 Second at maximum setting|
| Voltage / Frequency: 120 VAC (+10 -15%), 50/60Hz; 240 VAC (+10 -15%), 50/60Hz|
| Burden: Motor: 2.45 VA, 120 VAC; Clutch - 10.5 VA|
| Output Rating: 10 Amps, Resistive, 120 VAC; 5 Amps, Resistive, 240 VAC|
| Electrical Lifetime: Contingent on load characteristics. Average contact life at full load is 250,000 operations. At 1 amp load, switch life increases to 5 million cycles. Inrush current should not exceed 10 amps|
| Power On Response: 28 ms average pull - in; 17 ms average drop - out|
| Operating Temperature: +0 to +140F (-18 to +60C)|
| Vibration: Unaffected by 2.5G sinusoidal vibration magnitudes in both directions of three perpendicular mounting axes imposed|
from 10 to 900 Hz.
| Laboratory Testing: UL Recognition E61735; CSA Certification LR-26861; FM Approved 15030
HP515A6 - 10 second time range
HP514A6 - 15 second time range
HP517A6 - 5 second time ranges
HP50A6 - 30 second time range
HP51A6 - 60 second time range
HP52A6 - 150 second time range
HP53A6 - 5 minutes
HP54A6 - 10 minutes
HP518A6 - 15 minutes
HP55A6 - 30 minutes
HP56A6 - 60 minutes
HP57A6 - 150 minutes
HP58A6 - 5 hours
HP59A6 - 10 hours
HP510A6 - 30 hours
HP511A6 - 60 hours