Eagle Signal Timers

Online Purchasing

Eagle Signal BRE Reset Timers

_______________________________________________________________

Eagle Signal BRE Reset Timers

CX200 Microprocessor Timer / Counter

Eagle Signal Timers

Microprocessor based solid state timer / counter

Housed in a CYCL-FLEX case

Eagle Signal TimersFive time ranges from 19.999 sec. to 199 hrs: 59 min

Eagle Signal TimersTwo count rates - accept and display counts from 1 to 19999

Eagle Signal TimersTwo relay outputs - socket mounted for easy replacement

Eagle Signal TimersTwo form C instantaneous contacts and two form C programmed contacts

Eagle Signal Timers N.O. solid state MOSFET, delayed action switch rated at 1 ampere continuous load current, 0-264 VAC 50/60 Hz or DC

Eagle Signal TimersIdeal output for switching low level signals and high voltage loads due to MOSFET output's ON resistance of 0.5 ohm and very low OFF leakage

Eagle Signal TimersProgrammed outputs operate in one of four load sequences; OOX, OXO, OOX with pulse output, and OOX pulse output with repeat cycle operation

Eagle Signal TimersStandard start is defined as ON delay reset timer or counter -  For standard start units, timer/counter resets on power failure

Eagle Signal TimersReverse start or OFF delay units will not reset on power failure and will continue cycle when power is restored

Eagle Signal TimersNon-volatile memory data retention


Complete CX200 Specification Sheet

Buy These Online At www.industrialcontrolonline.com

Part No.

CX202A6

__________________________________________________________________

Eagle Signal / Danaher Controls

Help !! I Need More Information
Click Here To Contact Our Sales Staff

_________________________________________________________________________

Eagle Signal / Danaher Controls