Single tower desiccant dryers prevent moisture contamination by suppressing the pressure dew point by 20 deg. F or more at inlet air temperatures of 100 deg. F. Moisture is removed from the air as it passes through a bed of moisture-ABsorbing desiccant.

• Low Initial Cost
• No Power Required
• Install Indoors or Outdoors
• 10 Year Warranty
• 7 to 16,000 SCFM

Regenerative desiccant dryers supply the best possible protection for pneumatic instrumentation or sensitive process air.

Heatless dryers, from 3 through 5000 SCFM. Our Cycle SaverTM and EMCON ll energy saving controls provide maximum economy for heatless dryer operation. Mounted filter packages are available on 150 to 2000 SCFM models. Unique interlock logic assures reliable sequencing.

Internally heated dryers, from 150 through 3000 SCFM, provide dry air through the efficient use of convection, conduction, and radiant heat. A small amount of compressed air is used to dry the desiccant during regeneration.

Externally heated, blower purge dryers, from 350 through 10,000 SCFM, process large volumes of air economically. No compressed air is required for regeneration. Hot atmospheric air from an externally mounted blower and heater is used to regenerate the desiccant.

Van Air refrigerated dryers are precision-engineered for efficient, reliable, long-lasting service. Models are available from 10 SCFM to 20,000 SCFM.

• Automatic Operation
• 35-39 deg. F Dew Point
  
• Energy Managment System
  
• High Inlet Temperature Models