Shopping Cart

0 item(s) in cart/ total: $0    view cart
Ohio Belting & Transmission Co.

Sensopart-FT 55-CM Color Sensors

Posted by Ohio Belting & Transmission Co. on 7/25/2018 to Sensopart
Sensopart-FT 55-CM Color Sensors
The FT 55-CM color sensor offers a scope of functions and level of user-comfort that are unsurpassed in its performance class. The wide operating range – independent of distance – combined with the flexible color detection feature gives a diverse range of applications.

Pizzato- New Actuator for ST Series

Posted by Ohio Belting & Transmission Co. on 6/26/2018 to Pizzato
Pizzato- New Actuator for ST Series
These sensors use RFID (Radio Frequency IDentification) technology and provide high protection against possible manipulation thanks to the uniqueness of the codes transmitted by the actuator. Because they have no mechanical elements, they guarantee a long service life even in applications with frequent operating cycles and under harsh environmental conditions. 

Nexen-Zero Backlash Geared Bearings

Posted by Ohio Belting & Transmission Co. on 6/25/2018 to Nexen
Nexen-Zero Backlash Geared Bearings
Unlike some cam driven systems, the Precision Ring Drive Systems can start and stop at any incremental position. Users can change the motion profile by simply loading a new servo drive program. The Precision Ring Drive System also allow maximum acceleration or deceleration at any point without the risk of damage.

Turck- Linear Position Sensors

Posted by Ohio Belting & Transmission Co. on 6/20/2018 to Turck
Turck- Linear Position Sensors
Turck has expanded its portfolio of linear position sensors for mobile hydraulics with the introduction of the LTE series.

Leuze-Distance Sensors

Posted by Ohio Belting & Transmission Co. on 6/1/2018 to Leuze
Leuze-Distance Sensors
Leuze recently introduced two new distance sensors,the ODS 110/HT 110 and HRT 25B L, to its line. These new distance sensors add to an already large selection of Leuze products that offer different designs and with long operating ranges and several switching points available.

TURCK- Stainless Steel Barrel Sensors

Posted by Ohio Belting & Transmission Co. on 5/18/2018 to Turck
TURCK- Stainless Steel Barrel Sensors
Turck is pleased to announce the addition of two stainless steel sensors to its industry leading lineup. The NI3-EH04F and NI3-EG05F barrel sensors feature a full stainless steel body in smooth 4 mm and threaded 5 mm sizes, with an extended sensing range of 3 mm.

Turck - Custom Cable Manufacturing

Posted by Ohio Belting & Transmission Co. on 4/27/2018 to Turck
Turck - Custom Cable Manufacturing

  • Custom connectivity and design solutions
  • Large selection of connector types and pin configurations
  • Over 100 cable options available
  • Expert staff – each with 30+ years of cable assembly experience
  • Fast turnaround
  • Minimum order quantity of 1 piece

Sensopart- Automation Solutions

Posted by Ohio Belting & Transmission Co. on 3/9/2018 to Sensopart
Sensopart- Automation Solutions
Detection of Slight Nuances In Color

Error-free production is a major goal, particularly in the automotive sector - and this at a time of increasing personal choice for customers.
 
A color sensor, for example, can check that the seat selected by the customer or the correct interior trim is ready for installation. The problem is that many sensors have trouble distinguishing similar color shades and materials, for example leather

Dynapar-Product Discontinuation and Upgrade Notice

Posted by Ohio Belting & Transmission Co. on 2/20/2018 to Dynapar
Dynapar-Product Discontinuation and Upgrade Notice
Dynapar is excited to announce that the NorthStar SLIM Tach products (Model #’s SL56, RL67, SL85 and SL1250) will be replaced with its successors, the Next Generation NorthStar SLIM Tach products (ST56, ST67, ST85, and ST1250 respectively).

Nexen - Roller Pinion System

Posted by Ohio Belting & Transmission Co. on 1/24/2018 to Nexen
Nexen - Roller Pinion System
Make your machines run faster and more accurately with less maintenance. The new, patented RPS engages two teeth simultaneously to achieve unmatched accuracy with zero backlash - in any desired length! This amazing system is also extremely quiet, 99% efficient and can run without lubrication. Overcome the speed, accuracy, load and noise limitations of rack and pinion, ball screw and belt drive technologies with a lower maintenance, longer lasting solution.

Turck - Cabinet Condition Monitor

Posted by Ohio Belting & Transmission Co. on 11/22/2017 to Turck

Turck announces the IM12-CCM (Cabinet Condition Monitor) cabinet guard, a device capable of monitoring moisture and temperature limits while also detecting incorrectly closed doors. As an added benefit, the device monitors unauthorized access to switch cabinets, providing protection against manipulation in compliance with IT security regulations. The slim 12.5 mm DIN-rail cabinet guard can be easily installed in existing switch cabinets due to its compact design.

Pizzato - HX Series Hinge-Shaped Safety Switches

Posted by Ohio Belting & Transmission Co. on 11/17/2017 to Pizzato
Pizzato - HX Series Hinge-Shaped Safety Switches

Pizzato Elettrica has recently introduced its new HX series stainless steel safety hinged switches.

Thanks to the use of AISI 316L stainless steel and to the accurate surface finish, this new range of devices is suitable for any environment where chemical and corrosive agents are found or for aseptic environments where particular attention is required for cleanliness and hygiene (i.e. pharmaceutical sectors, chemical or marine sector).

Turck - PT2000 Pressure Transmitters

Posted by Ohio Belting & Transmission Co. on 11/16/2017 to Turck

Turck has expanded its line of PT2000 pressure transmitters with the release of a variant for use in hydraulic systems.

The new transmitters, which offer a welded stainless steel measuring cell for increased durability and increased chemical compatibility, have no elastomer seals and all wetted materials are 316L stainless steel. Additionally, the housing is more compact than existing solutions, suiting it for applications with space constraints. The transmitters are available in multiple pre-scaled pressure ranges from 30 to 14,500 psig.


SensoPart-Optical Distance Sensors

Posted by Ohio Belting & Transmission Co. on 6/14/2017 to Sensopart
SensoPart-Optical Distance Sensors
Rapid and precise measurement, accurate positioning, and detection of the most varied of materials – distance measurement is a central requirement in many areas of automation technology. Whether for checking the winding of coils with millimeter accuracy, the detection of double sheets, or the accurate positioning of storage and retrieval machines – distance sensors from SensoPart are reliable tools for many purposes.

Turck - Reelfast Cable Program

Posted by Ohio Belting & Transmission Co. on 6/14/2017 to Turck
Turck - Reelfast Cable Program
As an industrial innovator of factory and process automation solutions, Turck announces the Reelfast™ Bulk Cable program, which provides customers with a convenient solution to their cabling needs. Turck offers the broadest industry specific cable platforms with a wide variety of agency approvals, including UL, CSA, MSHA, IEEE, IEC and ABS. Each cable is specifically designed with quality, performance and durability in mind to ensure your application demands are met. Now with no minimum or maximum length.

Baldor - Quantis Reducers Now Availabe With Higher Ratios

Posted by Ohio Belting & Transmission Co. on 6/14/2017 to Baldor/ABB
Baldor - Quantis Reducers Now Availabe With Higher Ratios
The Quantis product family, a full line of modular gear drives, has expanded to offer four and five stages of gear reduction for all three types of gear arrangements; in-line helical (ILH), offset parallel (MSM) and right angle helical bevel (RHB). Quantis reducers and gearmotors can now be configured in ratios over 7500:1 with an output torque range up to 14,000 Nm, making the new output speed range 20-times greater than before.

Leuze - Safety Controllers for Presses

Posted by Ohio Belting & Transmission Co. on 5/24/2017 to Leuze
Leuze - Safety Controllers for Presses
With a wide variety of sensors, switches and control components the smart sensor people are excited to add to the arsenal of products that help to keep your team members safe while increasing productivity and minimizing interruptions. This month we release the next update to our safety PLC portfolio offering new versions to handle your eccentric or hydraulic press operations.

Turck - Extended Range M08 Sensors

Posted by Ohio Belting & Transmission Co. on 5/23/2017 to Turck
Turck - Extended Range M08 Sensors
Turck announces its new range of 8 mm barrel inductive proximity sensors. The technology of the ferrite core sensors has evolved, increasing the sensing range by up to 50 percent. As a result, flush mounted solutions can now be offered with an extended sensing range of 3 mm as well as with the conventional sensing range of 2 mm. The non-flush sensors are likewise available with a 3 or 5 mm sensing range. Thanks to the newly developed sensor electronics, Turck is also now able to produce devices with an ultra-short 15 mm design. 

Boston Gear-Reducer Express Program

Posted by Ohio Belting & Transmission Co. on 5/10/2017 to Boston Gear
Boston Gear-Reducer Express Program
Reducer Express 

Boston Gear offers performancequality and delivery matched by no one. The value created by a supplier that consistently ships same-day is priceless! The Reducer Express program has serviced Boston Gear customers for over 20 years at no additional cost. 

Turck-Preassembled Meltric Connector Cables

Posted by Ohio Belting & Transmission Co. on 5/10/2017 to Turck
Turck-Preassembled Meltric Connector Cables
Turck Debuts New Preassembled Meltric Connector Cable Assemblies to Improve Safety in Demanding Environments 
To improve worker safety in industrial environments, Turck introduces its new preassembled Meltric connector offering with arc protection. The products offer a complete cable assembly solution, saving labor and installation time and ensuring reliability. To protect against arcing, the Meltric series connectors feature spring-loaded demating technology inside an enclosed arc chamber, along with mating and demating shutters to shield users from live parts. 

Sensopart-Vision Systems

Posted by Ohio Belting & Transmission Co. on 5/10/2017 to Sensopart
Sensopart-Vision Systems
The traceability of production goods is gaining increasing importance as production facilities become more and more complex. A growing number of plastic components are therefore now marked with an ECC200 code that is an integral part of the injection mould, directly during production.

Sensopart - VISOR Multishot

Posted by Ohio Belting & Transmission Co. on 10/13/2016 to Sensopart
Sensopart - VISOR Multishot
Raised or recessed object details – such as embossed digits and characters on a credit card – are difficult to detect with standard image processing methods. Even use of lateral lighting generally results in poorly identifiable contours due to overexposure and shadows. SensoPart has remedied this situation by equipping its VISOR® series of vision sensors with the new multishot function.

TURCK - Ethernet IP Encoders

Posted by Ohio Belting & Transmission Co. on 10/11/2016 to Turck
TURCK - Ethernet IP Encoders
Turck announces the availability of EtherNet/IP enabled encoders, providing an optical-based encoder solution with electronic multiturn capabilities for position applications requiring feedback for customers using the EtherNet/IP and CIP (common industrial protocol) interface. 

Leuze - RSL400

Posted by Ohio Belting & Transmission Co. on 10/9/2016 to Leuze
Leuze - RSL400

With the new RSL 400 safety laser scanner, we have set a new standard worldwide in the supreme discipline of safety sensor technology. With our decades of experience, we have succeeded in developing a device that uses clever solutions to – in many cases – perform two tasks simultaneously.

Turck Expands I/O Device Portfolio with New TBEN-S Module

Posted by Ohio Belting & Transmission Co. on 9/1/2016 to Turck
Turck Expands I/O Device Portfolio with New TBEN-S Module
Turck is pleased to announce the release of the TBEN-S2-2COM-4DXP, a compact multiprotocol I/O module for Ethernet. This product stands out with its configurable serial ports and new capability for a Modbus RTU slave to connect into an Ethernet network.